How to Service and Repair a Right Engine Mount on 2006 Dodge Charger?

The first step for fixing and repairing engine mounts is to remove the negative battery cable from the trunk, along with the air cleaner housing. First, raise the wheels and take out the lower cover from each side of the engine, then unbolt the engine mount nuts and engine mount studs from the right-hand engine mount isolator. Stick a piece of wood under the oil pan and lift the engine with jackstands. Afterward, remove the bolts linking the engine mount isolator to the engine mount adapter and remove the engine mount isolator. Attach the engine mount isolator to the engine mount adapter with the assistance of bolts, turning the bolts to 75 Nm (55 ft. lbs.). Lift the mounting base out just below the frame, reinstall the engine mounts and tighten them to 12 Nm (106 inch lbs.). After setting the motor lower, remove the lifting device and lock down the engine mount isolator with 75 Nm of effort (55 ft. lbs.). Carefully fit and tighten the lower splash shield, with the bolts, lower the car, install the air cleaner housing and finally reattach the negative battery cable.

OEM 2006 Dodge Charger Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Engine Mounts found

View related parts
2006 Dodge Charger Transmission Mount Part Number: 4578062AC
$58.15 MSRP: $87.15
You Save: $29.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic & Manual Transmission Mount; Engine & Transfer Case Mount; Motor Mount; Support Bracket; Transmission Mount Bracket; Transmission Support; Bracket Transmission Mount
- Replaces: 4578062AB
- Item Weight: 5.30 Pounds
- Item Dimensions: 7.4 x 5.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578062AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Daytona 392, Daytona R/T, Pursuit, R/T, R/T 392, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2006 Dodge Charger Mount Bracket, Front Driver Side Part Number: 4578053AC
$100.40 MSRP: $152.00
You Save: $51.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Front Mount; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 4578053AB
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.0 x 5.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578053AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Daytona R/T, Pursuit, R/T, SE, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Dodge Charger Mount Bracket, Driver Side Part Number: 4578051AC
$104.38 MSRP: $158.00
You Save: $53.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Side Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4578051AB
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.6 x 7.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578051AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Pursuit, SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2006 Dodge Charger Mount Bracket, Passenger Side Part Number: 4578052AB
$101.86 MSRP: $155.00
You Save: $53.14 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 4578052AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.0 x 4.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578052AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Daytona R/T, Pursuit, R/T, SE, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Dodge Charger Front Mount Part Number: 4578044AF
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Cushion Engine Support; Engine Mount
- Position: Front
- Replaces: 4578044AC, 4578044AD, 4578044AE
- Item Weight: 4.20 Pounds
- Item Dimensions: 4.7 x 6.2 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578044AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Pursuit, SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2006 Dodge Charger Transmission Mount Bracket Part Number: 4578055AE
Product Specifications
- Other Name: Crossmember - Transmission; Automatic Transmission Mount Bracket; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission; Transmission Mount
- Replaces: 4578055AD
- Item Weight: 6.70 Pounds
- Item Dimensions: 25.3 x 14.7 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578055AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Daytona 392, Daytona R/T, Pursuit, R/T, R/T 392, R/T Scat Pack, SE, SRT 392, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2006 Dodge Charger Mount Bracket, Driver Side Part Number: 4578049AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4578049AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.6 x 6.0 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578049AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, SE | 2.7L V6, 6 Cyl 2.7 L GAS
View related parts
2006 Dodge Charger Front Support Part Number: 4578046AC
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Mount; Cushion Engine Support
- Position: Front
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.6 x 6.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578046AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Daytona R/T, Pursuit, R/T | 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Charger Front Mount Part Number: 5037794AC
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Cushion Engine Support; Insulator Engine Mount
- Position: Front
- Replaces: 5037794AA, 5037794AB
- Item Weight: 4.20 Pounds
- Item Dimensions: 4.6 x 6.1 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037794AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2006 Dodge Charger Engine Mount Parts and Q&A

Q: How to Service and Repair a Right Engine Mount on 2006 Dodge Charger?
A: The first step for fixing and repairing engine mounts is to remove the negative battery cable from the trunk, along with the air cleaner housing. First, raise the wheels and take out the lower cover from each side of the engine, then unbolt the engine mount nuts and engine mount studs from the right-hand engine mount isolator. Stick a piece of wood under the oil pan and lift the engine with jackstands. Afterward, remove the bolts linking the engine mount isolator to the engine mount adapter and remove the engine mount isolator. Attach the engine mount isolator to the engine mount adapter with the assistance of bolts, turning the bolts to 75 Nm (55 ft. lbs.). Lift the mounting base out just below the frame, reinstall the engine mounts and tighten them to 12 Nm (106 inch lbs.). After setting the motor lower, remove the lifting device and lock down the engine mount isolator with 75 Nm of effort (55 ft. lbs.). Carefully fit and tighten the lower splash shield, with the bolts, lower the car, install the air cleaner housing and finally reattach the negative battery cable.