How is the Left Engine Mount Installed on Dodge Charger?

First, align the left engine mount isolator (1) with its place on the installation stand. Following this, implement the left engine mount isolator with the engine mount adapter, using bolts tightly enough so there is 75 Nm (55 ft. lbs.) of torque. Lower the engine below the frame, so the mount is clear, then attach the studs and tighten each one to 12 Nm (106 in. lbs.). When the engine is lowered, remove the lift device and fasten the engine mount isolator nuts (1) to 75 Nm (55 ft. lbs.). Attach the lower splash shield (2) underneath with retaining bolts (1), then bring the vehicle down. Put in the air cleaner housing assembly (3) and attach the negative battery (1) cable after that.

How to Service and Repair a Left Engine Mount on Dodge Charger?

Before touching the left engine mount, take out the negative battery cable from under the trunk and remove the air cleaner's housing. Lift the vehicle, remove the lower splash shield using the retaining bolts, then unbolt and unthread the nut and stud from the left mount isolator. Lay a wooden block under the oil pan and use a jackstand to jack up the engine. After that, take out the nuts and bolts holding the engine mount isolator to the engine mount adapter, then remove the isolator. For installation, put the engine mount isolator in position and bolt it to the engine mount adapter, using a torque of 75 Nm (55 ft. lbs.). Make sure the engine drops down, but it does not touch the frame, then put in the mount studs and tighten them at 12 Nm (106 inch lbs.). With the engine all the way to the bottom, take off the lift device and tighten the engine mount isolator nuts to 75 Nm (55 ft. lbs.). Put back the lower splash shield and fasten the retaining bolts, bring the vehicle down, assemble the air cleaner housing and then attach the negative battery cable.

OEM Dodge Charger Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

46 Engine Mounts found

View related parts
Dodge Charger Mount Bracket, Driver Side Part Number: 4726027AB
$147.11 MSRP: $224.00
You Save: $76.89 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount Left Side; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Charger | Daytona, Pursuit, R/T, R/T Road & Track, SE | 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Transmission Mount Part Number: 4578062AC
$58.15 MSRP: $87.15
You Save: $29.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic & Manual Transmission Mount; Engine & Transfer Case Mount; Motor Mount; Support Bracket; Transmission Mount Bracket; Transmission Support; Bracket Transmission Mount
- Replaces: 4578062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2017 Dodge Charger | Daytona 392, Daytona R/T, Pursuit, R/T, R/T 392, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Transmission Mount Part Number: 68146569AB
$66.29 MSRP: $99.35
You Save: $33.06 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic & Manual Transmission Mount; Transfer Case Mount; Transmission Mount Bracket; Bracket Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Charger | Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Scat Pack, SRT 392, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Mount Bracket, Driver Side Part Number: 4855025AC
$77.50 MSRP: $117.00
You Save: $39.50 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount Left Side; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4855025AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Motor Mount, Passenger Side Part Number: 68277081AA
$124.65 MSRP: $188.00
You Save: $63.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Isolator; Cushion Engine Support
- Position: Passenger Side
- Replaces: 4726030AH, 4726030AG, 4726030AE, 4726030AF, 4726030AC, 4726030AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT, GT Plus, Pursuit, R/T, SE, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Mount Bracket, Front Driver Side Part Number: 4578053AC
$100.40 MSRP: $152.00
You Save: $51.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Front Mount; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 4578053AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Daytona R/T, Pursuit, R/T, SE, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Mount Bracket, Driver Side Part Number: 4578051AC
$104.38 MSRP: $158.00
You Save: $53.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Side Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4578051AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Pursuit, SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Charger Motor Mount Part Number: 68277082AA
$119.04 MSRP: $180.00
You Save: $60.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount; Engine Mount Bracket; Front Mount; Mount; Isolator; Cushion Engine Support
- Replaces: 5090140AG, 5090140AD, 5090140AC, 5090140AF, 5090140AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | Daytona, GT, GT Plus, Pursuit, R/T, R/T Road & Track, SE, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Motor Mount, Passenger Side Part Number: 68062142AH
$178.56 MSRP: $271.00
You Save: $92.44 (35%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Engine Mount Right
- Position: Passenger Side
- Replaces: 68062142AC, 68062142AD, 68062142AG, 68062142AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Transmission Mount Bracket Part Number: 5038752AA
$64.73 MSRP: $97.10
You Save: $32.37 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic Transmission Mount Bracket; Transfer Case Mount; Bracket Transmission Mount; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Transmission Mount Bracket Part Number: 68170323AA
$177.88 MSRP: $263.00
You Save: $85.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Automatic Transmission Mount Bracket; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Charger | Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Scat Pack, SRT 392, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Transmission Mount Bracket Part Number: 5181958AB
$177.88 MSRP: $263.00
You Save: $85.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Automatic Transmission Mount Bracket; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Transmission Mount Part Number: 68092519AA
$53.98 MSRP: $79.25
You Save: $25.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Insulator; Mount Transmission
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Trans Crossmember Part Number: 4578156AG
$389.30 MSRP: $568.00
You Save: $178.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Transmission Crossmember; Crossmember; Crossmember Transmission
- Replaces: 4578156AD, 4578156AF, 4578156AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Charger
- 2007-2008 Dodge Charger | 5.7L V8
View related parts
Dodge Charger Transmission Mount Part Number: 68084747AA
$42.81 MSRP: $62.85
You Save: $20.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Insulator; Mount Transmission
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Motor Mount, Driver Side Part Number: 68062143AH
$141.53 MSRP: $188.00
You Save: $46.47 (25%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount; Engine Mount Left
- Position: Driver Side
- Replaces: 68062143AF, 68062143AD, 68062143AG, 68062143AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Motor Mount, Driver Side Part Number: 5038789AA
$189.79 MSRP: $284.00
You Save: $94.21 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Left; Engine Mount Bracket; Mount; Engine Mount Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Front Mount Part Number: 4578046AF
$121.57 MSRP: $161.00
You Save: $39.43 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Charger | Pursuit, R/T, SE | 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Mount Bracket, Passenger Side Part Number: 4578154AC
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount, Front Right; Motor Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 4578154AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Charger | Pursuit, R/T, SE | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Support, Passenger Side Part Number: 4578194AE
Product Specifications
- Other Name: Support - Engine Support; Automatic Transmission Mount, Right; Engine Mount Torque Strut; Motor Mount; Mount; Cushion; Cushion Engine Support
- Position: Passenger Side
- Replaces: 4578194AD, 4578194AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Charger | Pursuit, R/T, SE | 5.7L V8, 8 Cyl 5.7 L GAS

| Page 1 of 3 |Next >

1-20 of 46 Results

Dodge Charger Engine Mount

Choose OEM Engine Mount that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Dodge Charger vehicles serves two primary functions: It insulates the noise and any vibrations that are occasioned by the operation of the engine while at the same time holding the engine firmly in its correct position within the car's chassis. This isolation is useful in providing comfort but it is equally important to ensure that the engine is positioned in the correct position to ensure safe driving of the car and also ensure other parts do not get damaged. Traditional Brake and Clutch Engine Mounts have developed over the years to consist of metal brackets with rubber isolators in between. Some of the further developed newer technologies are hydraulic mounts which are moreeffective in damping vibrations and electronic active mounts which change the stiffness according to the revolutions per minute (RPM) of the engine. These improve performance and comfort and even though they do so, they may not function well if worn for too long or exposed to heat and fluids. Dodge Charger Engine Mounts require constant checking as this will help to ensure that they offer the premier Function and Safety.

Dodge Charger Engine Mount Parts and Q&A

Transmission Mount
4578062AC
Q: How is the Left Engine Mount Installed on Dodge Charger?
A:
First, align the left engine mount isolator (1) with its place on the installation stand. Following this, implement the left engine mount isolator with the engine mount adapter, using bolts tightly enough so there is 75 Nm (55 ft. lbs.) of torque. Lower the engine below the frame, so the mount is clear, then attach the studs and tighten each one to 12 Nm (106 in. lbs.). When the engine is lowered, remove the lift device and fasten the engine mount isolator nuts (1) to 75 Nm (55 ft. lbs.). Attach the lower splash shield (2) underneath with retaining bolts (1), then bring the vehicle down. Put in the air cleaner housing assembly (3) and attach the negative battery (1) cable after that.
Mount Bracket, Front Driver Side
4578053AC
Q: How to Service and Repair a Left Engine Mount on Dodge Charger?
A:
Before touching the left engine mount, take out the negative Battery Cable from under the trunk and remove the air cleaner's housing. Lift the vehicle, remove the lower splash shield using the retaining bolts, then unbolt and unthread the nut and stud from the left mount isolator. Lay a wooden block under the Oil Pan and use a jackstand to jack up the engine. After that, take out the nuts and bolts holding the engine mount isolator to the engine mount adapter, then remove the isolator. For installation, put the engine mount isolator in position and bolt it to the engine mount adapter, using a torque of 75 Nm (55 ft. lbs.). Make sure the engine drops down, but it does not touch the frame, then put in the mount studs and tighten them at 12 Nm (106 inch lbs.). With the engine all the way to the bottom, take off the lift device and tighten the engine mount isolator nuts to 75 Nm (55 ft. lbs.). Put back the lower splash shield and fasten the retaining bolts, bring the vehicle down, assemble the air cleaner housing and then attach the negative battery cable.