How to Service and Repair a Vapor Canister on 2006 Dodge Charger?

To fit the Evaporative Emission Control Canister, un-attach the negative battery cable, lift up the vehicle, and take out the tire as well as the splash shield of the right rear. Take out the canister, disconnect EVAP line and install the new one. Put back together by reconnecting hoses, replacing the tire and reconnecting the battery.

OEM 2006 Dodge Charger Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2006 Dodge Charger Vapor Canister Part Number: 4891761AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 5.10 Pounds
- Item Dimensions: 15.5 x 10.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891761AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Dodge Charger Vapor Canister Part Number: 4578366AG
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4578366AE, 4578366AD, 4578366AC, 4578366AF
- Item Weight: 4.90 Pounds
- Item Dimensions: 15.6 x 10.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578366AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Dodge Charger Vapor Canister Parts and Q&A

Q: How to Service and Repair a Vapor Canister on 2006 Dodge Charger?
A: To fit the Evaporative Emission Control Canister, un-attach the negative battery cable, lift up the vehicle, and take out the tire as well as the splash shield of the right rear. Take out the canister, disconnect EVAP line and install the new one. Put back together by reconnecting hoses, replacing the tire and reconnecting the battery.