How to Remove the Vapor Canister on Dodge Charger?

Connecting the negative battery cable after the canister as been removed is the next important step. After that, raise the vehicle and take out the right rear wheel and the splash shield found underneath. After that, unhook the EVAP line and separate the electrical connector from the rest. Undo the nut on the mount and slide the assembly toward the front off the rear brackets. Simply pull the vapor lines off the EVAP canister by squeezing the connectors and checking that you do not lose the rubber mounts while removing them. Afterwards, get rid of the mounting nuts and carefully take the canister out of the bracket.

How to Service and Repair a Vapor Canister on Dodge Charger?

The first step in serving or fixing the Evaporative Emission Control Canister is to disconnect the battery cable and jack up the vehicle. Take out the rear tire on the driver's side and then take off the inner splash shield. Next, disconnect the EVAP line and pull the electrical connector off the pump. Loosen and remove the mounting nut and move the assembly forwards off the rear mounting brackets, checking that you do not lose the rubber mounts in the canister brackets. Start by taking the connector off the vapor lines after squeezing it, remove the nuts and then lift out the canister from the bracket. To attach the canister, place it onto the fitting on the front end of the vehicle, tighten the mounting nuts and attach the hoses to the vapor canister. Add the rubber isolator to the canister brackets and then slide on the brackets to the mounting brackets. Fix the assembly mounting nut to the engine block, attach the electrical connector to the pump, secure it and finally slap on the EVAP line. Go over the protective inner shield and the tire again, place the vehicle on the ground and reattach the negative battery cable.

OEM Dodge Charger Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Vapor Canisters found

View related parts
Dodge Charger Vapor Canister Part Number: 4593937AC
$214.08 MSRP: $322.00
You Save: $107.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Dodge Charger | Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 68423700AC
$161.68 MSRP: $247.00
You Save: $85.32 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 68423700AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Dodge Charger | GT, Pursuit, R/T, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SXT, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 68231653AF
$226.60 MSRP: $335.00
You Save: $108.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 68057086AD, 68057086AC, 68231653AE, 68231653AA, 68231653AC, 68231653AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Dodge Charger | Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 4578587AH
$312.71 MSRP: $466.00
You Save: $153.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Evaporative Emissions System Lines; Vent Hose
- Replaces: 68027916AA, 4578587AE, 4578587AF, 4578587AD, 68027916AB, 4578587AG, 4578587AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 68401344AF
$252.66 MSRP: $376.00
You Save: $123.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister
- Replaces: 68401344AE, 68401344AC, 68401344AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Dodge Charger | GT, Pursuit, R/T, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SXT, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 68421012AB
$182.86 MSRP: $277.00
You Save: $94.14 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister
- Replaces: 68342222AB, 68421012AA, 68342222AC, 68342222AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2019 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus, SXT Plus Leather, Scat Pack | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 4891761AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 4723550
Product Specifications
- Other Name: Canister Package - Vapor; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985-1987 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 4271982
Product Specifications
- Other Name: Can Package - Vapor 3 Portion; Canister, Vapor-3 Portion - Stamped 4227028, 4241836; Canister, Vapor-3 Portion; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Vapor Canister Part Number: 4578366AG
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4578366AE, 4578366AD, 4578366AC, 4578366AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Charger Vapor Canister

Choose OEM Vapor Canister that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Vapor Canister follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Vapor Canister is located in the Dodge Charger car and is a vital part of the evaporative emission control system which collects gasoline that evaporates from the fuel tank. In addition, it is also mainly used to store these vapors and return them to the engine whenever possible improving the fuel economy and reducing the smell of gasoline around the vehicle. Different types of Vapor Canisters have been used in Dodge Charger model in the years in regard to the changing emission rules. Although the precise distinctions between these canisters are not described it can be assumed that they indicate development in technology to enhance the efficiency and compliance with emission legislation. That is why Vapor Canister performance plays the crucial role in overall of the emissions control in Dodge Charger automobiles.

Dodge Charger Vapor Canister Parts and Q&A

Vapor Canister
4578587AH
Q: How to Remove the Vapor Canister on Dodge Charger?
A:
Connecting the negative Battery Cable after the canister as been removed is the next important step. After that, raise the vehicle and take out the right rear wheel and the splash shield found underneath. After that, unhook the EVAP line and separate the electrical connector from the rest. Undo the nut on the mount and slide the assembly toward the front off the rear brackets. Simply pull the vapor lines off the EVAP canister by squeezing the connectors and checking that you do not lose the rubber mounts while removing them. Afterwards, get rid of the mounting nuts and carefully take the canister out of the bracket.
Vapor Canister
4891761AA
Q: How to Service and Repair a Vapor Canister on Dodge Charger?
A:
The first step in serving or fixing the Evaporative Emission Control Canister is to disconnect the Battery Cable and jack up the vehicle. Take out the rear tire on the driver's side and then take off the inner splash shield. Next, disconnect the EVAP line and pull the electrical connector off the pump. Loosen and remove the mounting nut and move the assembly forwards off the rear mounting brackets, checking that you do not lose the rubber mounts in the canister brackets. Start by taking the connector off the vapor lines after squeezing it, remove the nuts and then lift out the canister from the bracket. To attach the canister, place it onto the fitting on the front end of the vehicle, tighten the mounting nuts and attach the hoses to the vapor canister. Add the rubber isolator to the canister brackets and then slide on the brackets to the mounting brackets. Fix the assembly mounting nut to the engine block, attach the electrical connector to the pump, secure it and finally slap on the EVAP line. Go over the protective inner shield and the tire again, place the vehicle on the ground and reattach the negative battery cable.