JeepParts
My Garage
My Account
Cart
OEM 2006 Dodge Magnum Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2006 Dodge Magnum Negative Cable Part Number: 4607550AA
$150.48 MSRP: $224.00You Save: $73.52 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Wiring - Battery Negative; Battery Cable; Battery Cables; Ground Strap; Wiring Battery Negative
- Replaces: 4759975AB, 4759975AC
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 4.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4607550AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Dodge Magnum Positive Cable Part Number: 4759976AG
Product Specifications- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Replaces: 4759976AD, 4759976AC, 4759976AB, 4759976AE, 4759976AF
- Item Weight: 5.10 Pounds
- Item Dimensions: 14.1 x 13.5 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4759976AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Dodge Magnum Battery Cable Parts and Q&A
- Q: How to Service and Repair a Battery Cable in the Engine Compartment for Positive on 2006 Dodge Magnum?A: Before handling the battery positive cable, first switch the ignition off and turn off every electrical accessory. Remove the tire cover to access the battery and then break the negative cable from the battery (3). With the vehicle raised on a hoist and the right front wheelhouse shield taken off, you'll find the battery positive cable bulkhead outside terminal. Take the battery positive cable away from the sleeve where the bulkhead is installed and the starter is fastened. To free the positive battery cable, take off the routing clip at the back of the engine for the 2.7L and 3.5L or remove the clip attached to the 5.7L starter's back if you have one. Disconnect the positive battery cable from your vehicle and keep a close eye on how it is routed. While installing, put the battery positive cable in the engine compartment and attach it to the proper engine type's routing clips. Attach the battery positive cable to the starter and its fasteners in the bulkhead and then fit the right front wheelhouse splash shield again. Decrease the suspension, link the negative battery terminal (3) and top off the installation with the spare tire cover.
Related 2006 Dodge Magnum Parts
2006 Dodge Magnum Alternator
2006 Dodge Magnum Alternator Bracket
2006 Dodge Magnum Battery Tray
2006 Dodge Magnum Car Batteries
2006 Dodge Magnum Starter Motor