How to Service an Ignition Coil on 2006 Dodge Magnum?

In order to service the ignition coil, unscrew the negative battery cable and take out the intake manifold. Blow off the part with compressed air, and remove the electrical connector of the ignition coil. Install the coil again using screws to fix it, reconnect the electrical connector and put the intake manifold and battery cable back together.

OEM 2006 Dodge Magnum Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2006 Dodge Magnum Ignition Coil Part Number: 4606869AD
$83.46 MSRP: $116.00
You Save: $32.54 (29%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil
- Replaces: 4606869AC, 4606869AB, 4606869AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.7 x 3.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606869AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Magnum Submodels:
- SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2006 Dodge Magnum Ignition Coil Part Number: 68238603AA
$97.78 MSRP: $144.00
You Save: $46.22 (33%)
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 3.5 x 6.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Magnum Submodels:
- R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Dodge Magnum Ignition Coil Parts and Q&A

Q: How to Service an Ignition Coil on 2006 Dodge Magnum?
A: In order to service the ignition coil, unscrew the negative battery cable and take out the intake manifold. Blow off the part with compressed air, and remove the electrical connector of the ignition coil. Install the coil again using screws to fix it, reconnect the electrical connector and put the intake manifold and battery cable back together.