Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint, Front Lower; Ball Joint Kit Lower Control Arm includes Ball Joint, Snap Ring, and Nut.
Position: Front Lower
Replaces: 5170824AB, 5170824AA
Item Weight: 2.70 Pounds
Item Dimensions: 7.7 x 4.8 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5170824AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
Other Name: Balljoint - Upper Control Arm; Suspension Ball Joint, Front Upper; Suspension Ball Joint; Ball Joint; Upper Ball Joints
Position: Front Upper
Replaces: 5174041AA, 5174041AB
Item Weight: 1.60 Pounds
Item Dimensions: 5.3 x 4.8 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5174041AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2006 Dodge Ram 1500 Ball Joint Parts and Q&A
Q: How to Install a 4X2 (LD) Lower Ball Joint on 2006 Dodge Ram 1500?
A: Before installing the 4X2 (LD) lower ball joint, lubricate all threaded parts of C4212F (press), 86981 (driver) and 86983 (receiver) with extreme pressure to increase tool life and correct operation. At this point, push the ball joint into the control arm using the mentioned tools. Once the ball joint flange is in place, put in three evenly placed stakes with the punch and hammer. Next, place the steering knuckle, after which add the tie rod end into it. Then, set the brake caliper and rotor in place, next to the tire and wheel. Afterwards, look at the vehicle's ride height and arrange a wheel alignment.