How to Remove and Install a Canister Purge Valve on 2006 Dodge Ram 2500?

The engine compartment contains the duty cycle EVAP canister purge valve (3) on the side of the PDC. To pull it out, unplug the connector at the valve first, then unplug the vacuum harness (2) and finally get it out of the mounting bracket. First, install the valve assembly onto the mounting bracket, followed by connecting the vacuum harness and end by connecting the electrical connector.

OEM 2006 Dodge Ram 2500 Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2006 Dodge Ram 2500 Purge Valve Part Number: 4669569
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge Solenoid; Purge Solenoid; EGR Solenoid; Proportional and Linear Purge Solenoids.
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669569
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS

2006 Dodge Ram 2500 Canister Purge Valve Parts and Q&A

Q: How to Remove and Install a Canister Purge Valve on 2006 Dodge Ram 2500?
A: The engine compartment contains the duty cycle EVAP canister purge valve (3) on the side of the PDC. To pull it out, unplug the connector at the valve first, then unplug the vacuum harness (2) and finally get it out of the mounting bracket. First, install the valve assembly onto the mounting bracket, followed by connecting the vacuum harness and end by connecting the electrical connector.