How to Service an Engine Control Module on 2006 Dodge Sprinter 2500?

Your first step in servicing the Engine Control Module should be to disconnect the negative battery cable. At this point, unplug both ECM connectors and pull down from the ECM to take out the part from the bracket holding springs. Installation must ensure that the ECM can support the car's options package. Push the ECM carefully into the middle of the retaining bracket until you hear the bracket tensioning springs start to work. After that, link the ECM wiring connectors and then link the negative cable under the battery one more time.

OEM 2006 Dodge Sprinter 2500 Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Engine Control Module found

View related parts
2006 Dodge Sprinter 2500 Control Module Part Number: 5166760AC
$1754.05 MSRP: $2670.00
You Save: $915.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5166760AA, 5140003AA, 5166760AB, 5142780AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 9.2 x 8.8 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166760AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL

2006 Dodge Sprinter 2500 Engine Control Module Parts and Q&A

Q: How to Service an Engine Control Module on 2006 Dodge Sprinter 2500?
A: Your first step in servicing the Engine Control Module should be to disconnect the negative battery cable. At this point, unplug both ECM connectors and pull down from the ECM to take out the part from the bracket holding springs. Installation must ensure that the ECM can support the car's options package. Push the ECM carefully into the middle of the retaining bracket until you hear the bracket tensioning springs start to work. After that, link the ECM wiring connectors and then link the negative cable under the battery one more time.