How to Service and Repair a MAP Sensor on 2006 Dodge Sprinter 2500?

To repair the Absolute Pressure Sensor, first disconnect the negative battery cable and the sensor connector and remove the sensor. For the installation, insert the sensor into the air cleaner cover, use the fastener, reconnect the electrical connector, and lastly reconnect the negative battery cable.

OEM 2006 Dodge Sprinter 2500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2006 Dodge Sprinter 2500 M.A.P. Sensor Part Number: 68066040AA
$91.71 MSRP: $143.00
You Save: $51.29 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Boost Pressure Sensor; T-MAP Sensor; Level Sensor
- Replaces: 5117545AA, 5117545AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 2.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68066040AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2006 Dodge Sprinter 2500 Map Sensor Part Number: 5080345AC
Product Specifications
- Other Name: Sensor - Map; Air Pressure Sensor, Height Adaptation; Manifold Absolute Pressure Sensor; Pressure Sensor; Level Sensor
- Replaces: 5080345AB, 5080345AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 1.8 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080345AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2006 Dodge Sprinter 2500 MAP Sensor Parts and Q&A

Q: How to Service and Repair a MAP Sensor on 2006 Dodge Sprinter 2500?
A: To repair the Absolute Pressure Sensor, first disconnect the negative battery cable and the sensor connector and remove the sensor. For the installation, insert the sensor into the air cleaner cover, use the fastener, reconnect the electrical connector, and lastly reconnect the negative battery cable.