How to Remove and Replace a Tail Light on 2006 Dodge Sprinter 2500?

To replace the tail lamp, remove the rear bumper, unscrew screw 2 and its nut, then screw 4 to take off the rear-end door step. Unclip the taillamp lens, gasket, nut, and lamp carrier. Remove nut 3, check seal 2, and reinstall in reverse order.

OEM 2006 Dodge Sprinter 2500 Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
2006 Dodge Sprinter 2500 Lamp Housing, Rear Passenger Side Part Number: 5103597AA
$171.82 MSRP: $261.00
You Save: $89.18 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Housing, Rear Right; Lamp Tail Stop Turn
- Position: Rear Passenger Side
- Item Weight: 4.40 Pounds
- Item Dimensions: 30.3 x 8.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103597AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2006 Dodge Sprinter 2500 Lamp Housing, Rear Driver Side Part Number: 5103596AA
$157.22 MSRP: $239.00
You Save: $81.78 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Housing, Rear Left; Lamp Tail Stop Turn
- Position: Rear Driver Side
- Item Weight: 2.60 Pounds
- Item Dimensions: 20.0 x 8.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103596AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2006 Dodge Sprinter 2500 Tail Light Parts and Q&A

Q: How to Remove and Replace a Tail Light on 2006 Dodge Sprinter 2500?
A: To replace the tail lamp, remove the rear bumper, unscrew screw 2 and its nut, then screw 4 to take off the rear-end door step. Unclip the taillamp lens, gasket, nut, and lamp carrier. Remove nut 3, check seal 2, and reinstall in reverse order.