How to Maintain an Ambient Temperature Sensor on 2006 Dodge Stratus?

Before you service the ambient temperature sensor, make sure to remove and isolate the battery's negative cable. Take out the push pin that was keeping the ambient temperature sensor in place in the front bumper beam, then detach the sensor's wire harness and remove it. Connect the wire harness connector to the ambient temperature sensor and slide it back into the front bumper beam. Insert the sensor to the push pin and then reattach the negative battery cable.

OEM 2006 Dodge Stratus Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ambient Temperature Sensor found

View related parts
2006 Dodge Stratus Temperature Sensor, Front Part Number: 68518243AA
$47.14 MSRP: $69.85
You Save: $22.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Ambient Temperature; Air Temp, Front; Battery Temp; Coolant Temp.; Ambient Temperature Sensor; Air Temperature Sensor; Temperature Sending Unit; Sentinel Sensor
- Position: Front
- Replaces: 5149025AA, 5149265AB, 56042395
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68518243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 2.0L L4, 2.4L L4, 2.5L V6, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Dodge Stratus Ambient Temperature Sensor Parts and Q&A

Q: How to Maintain an Ambient Temperature Sensor on 2006 Dodge Stratus?
A: Before you service the ambient temperature sensor, make sure to remove and isolate the battery's negative cable. Take out the push pin that was keeping the ambient temperature sensor in place in the front bumper beam, then detach the sensor's wire harness and remove it. Connect the wire harness connector to the ambient temperature sensor and slide it back into the front bumper beam. Insert the sensor to the push pin and then reattach the negative battery cable.