How to service a thermostat housing on 2006 Dodge Stratus?

To service the thermostat housing, drain the cooling system, remove the thermostat, disconnect the coolant temperature sensor and heater hose and remove the housing and gasket. Clean surfaces, install gasket and housing, tighten bolts to 28 Nm, reconnect components and refill cooling system.

OEM 2006 Dodge Stratus Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostat Housings found

View related parts
2006 Dodge Stratus Thermostat Housing Part Number: 4792490AA
$80.89 MSRP: $124.00
You Save: $43.11 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Thermostat Housing Cover; Housing Thermostat
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.8 x 6.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792490AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS
View related parts
2006 Dodge Stratus Thermostat Housing Part Number: 4792612AB
$39.47 MSRP: $85.20
You Save: $45.73 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing Cover
- Replaces: 4792612AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.2 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792612AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Dodge Stratus Thermostat Housing Parts and Q&A

Q: How to service a thermostat housing on 2006 Dodge Stratus?
A: To service the thermostat housing, drain the cooling system, remove the thermostat, disconnect the coolant temperature sensor and heater hose and remove the housing and gasket. Clean surfaces, install gasket and housing, tighten bolts to 28 Nm, reconnect components and refill cooling system.