How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2006 Jeep Wrangler?

To service the harmonic balancer and crankshaft pulley, remove the accessory drive belts and crankshaft damper bolt. Use Special Tool 3-Jaw Puller 1026 to remove the damper. Install it with an M12 bolt and secure it to 142 Nm (105 ft. lbs.), then reinstall the belts.

OEM 2006 Jeep Wrangler Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

View related parts
2006 Jeep Wrangler Vibration Damper Part Number: 53010477AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 6.30 Pounds
- Item Dimensions: 13.0 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010477AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2006 Jeep Wrangler Vibration Damper Part Number: 33002920AC
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Replaces: 33002920AB
- Item Weight: 8.70 Pounds
- Item Dimensions: 4.0 x 8.3 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 33002920AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Harmonic Balancer Parts and Q&A

Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2006 Jeep Wrangler?
A: To service the harmonic balancer and crankshaft pulley, remove the accessory drive belts and crankshaft damper bolt. Use Special Tool 3-Jaw Puller 1026 to remove the damper. Install it with an M12 bolt and secure it to 142 Nm (105 ft. lbs.), then reinstall the belts.