How to Service and Repair a Coolant Reservoir on 2007 Chrysler Crossfire?

First, take off the negative battery cable and only then drain a portion of the cooling fluid from the cooling system. After that, detach the smaller coolant hose coming out of the coolant recovery reservoir and the large hose at the bottom of that reservoir. Following that, remove the connectors (1 and 2) at the coolant level sensor harness and on the overflow hose. After that, take out the retaining nuts (2) and raise the coolant recovery reservoir from its space above the engine.

OEM 2007 Chrysler Crossfire Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2007 Chrysler Crossfire Reservoir Tank Part Number: 5101601AA
Product Specifications
- Other Name: Bottle - Pressurized Coolant; Engine Coolant Reservoir; Bottle Pressurized Coolant; Coolant Reservoir
- Item Weight: 3.10 Pounds
- Item Dimensions: 10.7 x 9.9 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101601AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Coolant Reservoir Parts and Q&A

Q: How to Service and Repair a Coolant Reservoir on 2007 Chrysler Crossfire?
A: First, take off the negative battery cable and only then drain a portion of the cooling fluid from the cooling system. After that, detach the smaller coolant hose coming out of the coolant recovery reservoir and the large hose at the bottom of that reservoir. Following that, remove the connectors (1 and 2) at the coolant level sensor harness and on the overflow hose. After that, take out the retaining nuts (2) and raise the coolant recovery reservoir from its space above the engine.