How to Install a Thermostat on 2007 Chrysler Crossfire?

Set the thermostat in its housing, apply a new seal ring and secure the housing using 10 Nm (89 in.lbs.) of effort. Then, link the upper radiator hose and fill the cooling part of your car. Once done, start the car and inspect it for any pools of coolant underneath. In addition, check the coolant again and make sure the level is right.

OEM 2007 Chrysler Crossfire Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2007 Chrysler Crossfire Thermostat Housing Part Number: 5098918AA
Product Specifications
- Other Name: Thermostat; Thermostat Housing Cover; Housing Thermostat
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.6 x 4.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098918AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Thermostat Parts and Q&A

Q: How to Install a Thermostat on 2007 Chrysler Crossfire?
A: Set the thermostat in its housing, apply a new seal ring and secure the housing using 10 Nm (89 in.lbs.) of effort. Then, link the upper radiator hose and fill the cooling part of your car. Once done, start the car and inspect it for any pools of coolant underneath. In addition, check the coolant again and make sure the level is right.