How to Detach the Body Emblem on 2007 Chrysler Sebring?

Put a strip of masking tape along the body, parallel to the top of the nameplate. If it's below 21°C (70°F), use a heat lamp or gun to warm the emblem, but do not let the temperature go over 52°C (120°F). Following that, remove the adhesive backing from the emblem by working from the back of the figure and using a trim stick C-4755 or an alternative equivalent. After that, remove any remaining adhesive on the body by using Mopar® Super Kleen solvent or an alternate product.

OEM 2007 Chrysler Sebring Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Emblem found

View related parts
2007 Chrysler Sebring Medallion, Front Part Number: 5113607AB
Product Specifications
- Other Name: Emblem - Chrysler Wing; Hood Emblem, Front
- Position: Front
- Replaces: 5116124AC, 5113607AA, 5116124AD, 5116124AE, 5116124AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 38.2 x 12.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5113607AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Emblem Parts and Q&A

Q: How to Detach the Body Emblem on 2007 Chrysler Sebring?
A: Put a strip of masking tape along the body, parallel to the top of the nameplate. If it's below 21°C (70°F), use a heat lamp or gun to warm the emblem, but do not let the temperature go over 52°C (120°F). Following that, remove the adhesive backing from the emblem by working from the back of the figure and using a trim stick C-4755 or an alternative equivalent. After that, remove any remaining adhesive on the body by using Mopar® Super Kleen solvent or an alternate product.