How to Remove and Replace an Engine Control Module on 2007 Chrysler Sebring?

To change the Engine Control Module, turn off the ignition and disconnect the negative battery cable. Remove the air induction hose and Air Cleaner Housing and disconnect the electrical connectors of the PCM. Finally, take off the three fasteners holding the PCM in place. Remember to program the new PCM after installation.

OEM 2007 Chrysler Sebring Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engine Control Modules found

View related parts
2007 Chrysler Sebring PCM Part Number: R5150518AA
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 4692102AC, 5150518AB, 4692102AE, 5150472AA, 5150518AA, RL150518AA, R5150518AB, RL150518AB, 4692102AD
- Item Weight: 2.70 Pounds
- Item Dimensions: 3.7 x 9.6 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R5150518AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler Sebring PCM Part Number: R5033708AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 5033708AC, 5033708AE, 5033708AF, RL033708AF, 5033708AD
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.4 x 6.5 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R5033708AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Engine Control Module Parts and Q&A

Q: How to Remove and Replace an Engine Control Module on 2007 Chrysler Sebring?
A: To change the Engine Control Module, turn off the ignition and disconnect the negative battery cable. Remove the air induction hose and Air Cleaner Housing and disconnect the electrical connectors of the PCM. Finally, take off the three fasteners holding the PCM in place. Remember to program the new PCM after installation.