How to Install the Neutral Safety Switch on the Valve Body and Transaxle on 2007 Chrysler Sebring?

To install the Transmission Range Sensor (TRS) (1), connect it to the valve body and tighten the retaining screw (3) to 5 Nm (45 in. lbs.), then install the valve body onto the transaxle.

OEM 2007 Chrysler Sebring Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Neutral Safety Switches found

View related parts
2007 Chrysler Sebring Neutral Safety Switch Part Number: 4659676AC
$62.61 MSRP: $93.90
You Save: $31.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Parking Brake Warning Switch; Sensor Transmission Range
- Replaced by: 4659676AD
- Replaces: 4659676AB, 4659676
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4659676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Range Sensor Part Number: 5078710AB
Product Specifications
- Other Name: Sensor - Transmission Range
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5078710AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Sebring Submodels:
- Base, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Neutral Safety Switch Parts and Q&A

Q: How to Install the Neutral Safety Switch on the Valve Body and Transaxle on 2007 Chrysler Sebring?
A: To install the Transmission Range Sensor (TRS) (1), connect it to the valve body and tighten the retaining screw (3) to 5 Nm (45 in. lbs.), then install the valve body onto the transaxle.