How to Service and Repair a Headlight Bulb on 2007 Chrysler Sebring?

The very first step is to separate the battery negative cable before starting to work on the headlamp bulbs. To replace high beam bulbs, first remove the headlamp electrical plug, feel for the bulb, rotate it counterclockwise and then pull it backward from the front lamp. To work on the low beam driver side, remove the negative battery cable as before, unbolt the air intake housing and step it aside, cut free the air intake sensor and get rid of its bolt. Then, open up the air intake housing and put it aside, unplug the power distribution center, unclip the headlamp bulb electrical connector, hold the rear of the bulb, turn it counterclockwise and pull it rearward to take it from the front lamp unit. Repeat this process for the passenger side's low beam bulb: disconnect the battery, disconnect the electrical connector to the bulb, hold the back of the bulb and turn, pull out and remove it. First, break the negative battery connection, pass behind the opening in the front fender, disconnect the lamp electrical connector, twist the lamp counterclockwise and pull the socket away from the lamp to pull out the bulb.

OEM 2007 Chrysler Sebring Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Headlight Bulbs found

View related parts
2007 Chrysler Sebring Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Headlamp Bulb, Front Part Number: L0009005
$25.20 MSRP: $37.00
You Save: $11.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Headlamps; Composite Bulb; Lower Beam Bulb; Exterior Bulbs.
- Position: Front
- Replaces: MS820959
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009005
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Bulb & Socket, Front Part Number: L0009006
$26.50 MSRP: $38.95
You Save: $12.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Fog Light Bulb; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; Headlamp Bulb; High Beam, Roof, Fog, Lower Beam, Composite Bulbs; Bulb 9006; Headlight.
- Position: Front
- Replaces: 5096939AA, MS820960
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 2.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009006
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Turn Signal Bulb Part Number: 68604853AA
$12.60 MSRP: $18.45
You Save: $5.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Backup Lamp Bulb; Signal Lamp Bulb; Marker Lamp Bulb; Exterior Bulbs; Stoplamp Bulb; Taillamp Bulb; Bulbs
- Replaces: L0003757AK
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68604853AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Headlight Bulb Parts and Q&A

Q: How to Service and Repair a Headlight Bulb on 2007 Chrysler Sebring?
A: The very first step is to separate the battery negative cable before starting to work on the headlamp bulbs. To replace high beam bulbs, first remove the headlamp electrical plug, feel for the bulb, rotate it counterclockwise and then pull it backward from the front lamp. To work on the low beam driver side, remove the negative battery cable as before, unbolt the air intake housing and step it aside, cut free the air intake sensor and get rid of its bolt. Then, open up the air intake housing and put it aside, unplug the power distribution center, unclip the headlamp bulb electrical connector, hold the rear of the bulb, turn it counterclockwise and pull it rearward to take it from the front lamp unit. Repeat this process for the passenger side's low beam bulb: disconnect the battery, disconnect the electrical connector to the bulb, hold the back of the bulb and turn, pull out and remove it. First, break the negative battery connection, pass behind the opening in the front fender, disconnect the lamp electrical connector, twist the lamp counterclockwise and pull the socket away from the lamp to pull out the bulb.