How to Remove and Replace Exhaust Valve and Intake Valves on 2007 Chrysler Town & Country?

First take off the cylinder head, then press down on the valve springs with the C-3422-D tools and adapter 8464. After that, remove the valve retaining locks and slowly lower the valve spring compressor. Afterward, take out the valve spring retainer, valve spring and the seal from the valve stem. Before removing the valves, clear out any small protrusions from the bottom of each valve stem lock groove, to avoid touching the valve guides and confirm the position of every valve to make sure it is put back where it belongs.

OEM 2007 Chrysler Town & Country Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Valve found

View related parts
2007 Chrysler Town & Country Exhaust Valve Part Number: 4781029AB
Product Specifications
- Other Name: Valve - Exhaust; Valves; Valve Exhaust Standard
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781029AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2007 Chrysler Town & Country Exhaust Valve Parts and Q&A

Q: How to Remove and Replace Exhaust Valve and Intake Valves on 2007 Chrysler Town & Country?
A: First take off the cylinder head, then press down on the valve springs with the C-3422-D tools and adapter 8464. After that, remove the valve retaining locks and slowly lower the valve spring compressor. Afterward, take out the valve spring retainer, valve spring and the seal from the valve stem. Before removing the valves, clear out any small protrusions from the bottom of each valve stem lock groove, to avoid touching the valve guides and confirm the position of every valve to make sure it is put back where it belongs.