Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Dodge Caliber Cruise Control Switch

Steering Wheel Cruise Control Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Switch found

  • 2007 Dodge Caliber Cruise Control Switch - 4671929AC
    2007 Dodge Caliber Cruise Control Switch - 4671929AC
    2007 Dodge Caliber Cruise Control Switch - 4671929AC
    2007 Dodge Caliber Cruise Control Switch - 4671929AC
    2007 Dodge Caliber Cruise Control Switch - 4671929AC
    2007 Dodge Caliber Cruise Control Switch Diagram - 4671929AC
    View related parts

    2007 Dodge Caliber Cruise Switch Part Number: 4671929AC

    $64.06 MSRP: $95.75
    You Save: $31.69 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch - Speed Control; Cruise Control Switch; Engagement Switch; Switch; Switch Speed Control
    • Replaces: 4671929AB, 4671929AA, 4671929AE, 68057091AA
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.8 x 3.4 x 6.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4671929AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Cruise Control Switch Parts and Q&A

  • Q: How to Install the Cruise Control Switch and Driver Airbag in the Steering Wheel on 2007 Dodge Caliber?
    A: You will find the speed control switch inside the steering wheel. Wires from this switch go through the clock spring unit beneath the air bag module. First, link the electrical connector to the switch, then screw in the 2 speed control screws and secure them with 1.6 Nm (15 in. lbs.), so the seal is above the switch. Then, connect the horn switch and the three fasteners and connect the electrical connector to the Clock Spring. Once the sensor and the board are installed, install the driver air bag. Be sure not to connect the battery negative cable at this step. Attach the battery back in using the air bag System Test method described in Restraints, close the hood and then confirm both the vehicle and the system are working properly.

Related 2007 Dodge Caliber Parts

Alternate Year Models

+
2008 Dodge Caliber Cruise Control Switch