How to Install a Blower Motor Resistor in an HVAC System on 2007 Dodge Charger?

It is necessary to install a blower motor resistor in the HVAC housing and use 2 screws to fix it, tightening to 2 Nm (17 in. lbs.). Connect the resistor into the harness of the wire, clicking the locking tab. Lastly, replace the glove box back and connect negative battery cable once more.

OEM 2007 Dodge Charger Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2007 Dodge Charger Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Resistor Part Number: 5061094AB
$18.88 MSRP: $24.30
You Save: $5.42 (23%)
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 1.60 Pounds
- Item Dimensions: 3.7 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5061094AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2007 Dodge Charger Blower Motor Resistor Parts and Q&A

Q: How to Install a Blower Motor Resistor in an HVAC System on 2007 Dodge Charger?
A: It is necessary to install a blower motor resistor in the HVAC housing and use 2 screws to fix it, tightening to 2 Nm (17 in. lbs.). Connect the resistor into the harness of the wire, clicking the locking tab. Lastly, replace the glove box back and connect negative battery cable once more.