How to install a Blower Motor Resistor on Dodge Charger?

Secure the blower motor resistor into the HVAC housing with two screws, making sure you tighten each screw to 2 Nm (17 in. lbs.) After that, plug the wire harness connector onto the blower motor resistor, making sure the tab clicks in place. After that, attach the glove box to the instrument panel and restore the negative battery cable connection.

How to Maintain a Blower Motor Resistor on Dodge Charger?

Before working on the blower motor resistor, cut off the negative battery cable to disable the air bag system and then disengage anything connected to it for two minutes to ensure the air bag system capacitor is discharged. Make sure the blower motor has been off for five minutes so the resistor can cool down before you touch it. It's important to not run the blower motor without the resistor attached to prevent any issues with your car. To start, unhook the negative terminal from the battery and then take out the glove box from the instrument panel. After that, move the locking tab out of the way and disconnect the wire harness connector from the blower motor resistor. After that, take out the two screws holding the blower motor resistor to the HVAC housing and pull the resistor out.

OEM Dodge Charger Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Blower Motor Resistors found

View related parts
Dodge Charger Blower Motor Resistor, Rear Part Number: 68379071AA
$124.65 MSRP: $185.00
You Save: $60.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front & Rear.; Control Module; Fan Resistor; Module; Resistor; Module Power Blower Motor
- Position: Rear
- Replaces: 68079480AA, 68110616AB, 68029736AA, 68433698AA, 68110616AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2013 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Control Module, Front Part Number: 68224171AA
$179.01 MSRP: $270.00
You Save: $90.99 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front; Resistor; A/C Compressor; Compressor; Module; Module Power Blower Motor
- Position: Front
- Replaces: 68224171AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Resistor Part Number: 68037310AB
$23.10 MSRP: $34.25
You Save: $11.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 68037310AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Resistor Part Number: 5061094AB
$18.88 MSRP: $24.30
You Save: $5.42 (23%)
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Blower Motor Resistor Part Number: 4462842
Product Specifications
- Other Name: Resistor A/C Blower Motor; Climate Control Module; Blower Motor Switch; Resistor; Resistor, A/C Blower Motor; Resistor, Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS

Dodge Charger Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Blower Motor Resistor used in Dodge Charger cars is responsible for controlling of the blower motor speed. This component is used for circulating the hot/ cold air in the cabin and hence plays a role in comfort of passengers. This sits in the direction of the flow of air and since its electrical resistance controls the amount of electrical current hence the amount of air to flow in to the car, it is the Blower Motor Resistor that provides car users with the ability to regulate the climate. Depending on the year of manufacture of the Charger, different styles of Blower Motor Resistor might have been installed and thus the design and functionality might differ. Altered attributes as such could affect efficiency as well as performance of the blower motor types though in the above data some of the specific types are not highlighted. In summary, the Blower Motor Resistor is still important in supporting comfort during a drive.

Dodge Charger Blower Motor Resistor Parts and Q&A

Resistor
68037310AB
Q: How to install a Blower Motor Resistor on Dodge Charger?
A:
Secure the blower motor resistor into the HVAC housing with two screws, making sure you tighten each screw to 2 Nm (17 in. lbs.) After that, plug the wire harness connector onto the blower motor resistor, making sure the tab clicks in place. After that, attach the Glove Box to the instrument panel and restore the negative Battery Cable connection.
Blower Motor Resistor, Rear
68379071AA
Q: How to Maintain a Blower Motor Resistor on Dodge Charger?
A:
Before working on the Blower Motor resistor, cut off the negative Battery Cable to disable the air bag system and then disengage anything connected to it for two minutes to ensure the air bag system capacitor is discharged. Make sure the blower motor has been off for five minutes so the resistor can cool down before you touch it. It's important to not run the blower motor without the resistor attached to prevent any issues with your car. To start, unhook the negative terminal from the battery and then take out the Glove Box from the instrument panel. After that, move the locking tab out of the way and disconnect the wire harness connector from the blower motor resistor. After that, take out the two screws holding the blower motor resistor to the HVAC housing and pull the resistor out.