Other Name: Switch - Power Seat; Power Seat Switch, Front Right, Right; Control Switch; Seat Switch; Adjuster Switch; Switch; Switch Power Seat; Power Seat Switch
Position: Front Passenger Side
Replaces: 56040636AD, 56040636AB
Item Weight: 0.60 Pounds
Item Dimensions: 6.7 x 3.3 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56040636AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Switch - Heated Seat; Seat Heater Switch, Center Left, Left; Switch; Switch Heated Seat; Seat Heater Switch
Position: Driver Side
Item Weight: 0.40 Pounds
Item Dimensions: 3.8 x 2.7 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56045625AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2007 Dodge Durango Seat Switch Parts and Q&A
Q: How to Install a Seat Switch on 2007 Dodge Durango?
A: To install the power seat switch, put it on the seat cushion side panel and press it into place until it clicks into the four tabs on the panel. Then, connect an electrical connector, attach the side panel, reconnect the battery negative cable and check whether the power seat is working or not.