How to Install a Seat Heater Replacement on 2007 Dodge Durango?

Take off the sticky backing on the heating element and fix it straight to the cushion or cover the old heating part, not allowing any bending, to avoid causing it to fail quickly. Following this, attach connectors 1 and 2 from the new heating element and put back the battery negative cable. Check if the heated seat works properly after all other settings. Finally, set up the suitable seat cushion or cover for the seat back, keeping the seat wire harness in place by routing it through the seat and seat back and make sure any extra wire you find is tucked between the back of the cushion foam and the canvas flap on the trim cover.

OEM 2007 Dodge Durango Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2007 Dodge Durango Seat Cushion Heater, Lower Part Number: 5000013AB
Product Specifications
- Other Name: Seat Heater Pad, Front, Lower; Element; Heater Cushion; Seat Heater
- Position: Lower
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 7.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000013AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Durango Seat Back Heater, Upper Part Number: 5000014AA
Product Specifications
- Other Name: Pad; Seat Heater Pad, Front, Upper; Element; Heater Back; Seat Heater
- Position: Upper
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000014AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Dodge Durango Seat Heater Parts and Q&A

Q: How to Install a Seat Heater Replacement on 2007 Dodge Durango?
A: Take off the sticky backing on the heating element and fix it straight to the cushion or cover the old heating part, not allowing any bending, to avoid causing it to fail quickly. Following this, attach connectors 1 and 2 from the new heating element and put back the battery negative cable. Check if the heated seat works properly after all other settings. Finally, set up the suitable seat cushion or cover for the seat back, keeping the seat wire harness in place by routing it through the seat and seat back and make sure any extra wire you find is tucked between the back of the cushion foam and the canvas flap on the trim cover.