How to Install an Oil Pressure Switch on 2007 Dodge Magnum?

To install the oil pressure sensor, use Mopar(R) Thread Sealant on the threads of the switch and install the switch (part number 1). When you have secured it, connect the electrical connector, lower the vehicle and start the engine to see if there are any leaks. Lastly, check and top up the engine oil level if necessary.

OEM 2007 Dodge Magnum Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2007 Dodge Magnum Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Magnum Submodels:
- R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Magnum Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Magnum Submodels:
- SE, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Dodge Magnum Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2007 Dodge Magnum?
A: To install the oil pressure sensor, use Mopar(R) Thread Sealant on the threads of the switch and install the switch (part number 1). When you have secured it, connect the electrical connector, lower the vehicle and start the engine to see if there are any leaks. Lastly, check and top up the engine oil level if necessary.