How to Install an Oil Pressure Switch on 2008 Dodge Magnum?

Install Engine Oil Pressure Sensor/ Switch Threads To install the Engine Oil Pressure Sensor/ Switch, apply Mopar(R) Thread Sealant to threads. Connect the electrical connector and install the oil pressure switch. Once the vehicle has been lowered, then turn the engine on to monitor any leaks and then monitor and change the level of engine oil as necessary.

OEM 2008 Dodge Magnum Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2008 Dodge Magnum Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Magnum Submodels:
- SE, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Dodge Magnum Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2008 Dodge Magnum?
A: Install Engine Oil Pressure Sensor/ Switch Threads To install the Engine Oil Pressure Sensor/ Switch, apply Mopar(R) Thread Sealant to threads. Connect the electrical connector and install the oil pressure switch. Once the vehicle has been lowered, then turn the engine on to monitor any leaks and then monitor and change the level of engine oil as necessary.