How to Install a Starter Motor for a 2.7L Engine on 2007 Dodge Magnum?

To install the 2.7L engine starter motor, maneuver the engine starter motor past the transmission and exhaust, insert the plastic retainer into the dust shield and lock it into place. Install the starter bolts, electrical wiring, intermediate shaft alignment and pinch bolt tightening. Finally, reinstall the splash shield and connect the battery again.

OEM 2007 Dodge Magnum Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starter motors found

View related parts
2007 Dodge Magnum Starter Part Number: 4608801AC
$247.44 MSRP: $366.00
You Save: $118.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4608801AA, 4608801AB
- Item Weight: 9.60 Pounds
- Item Dimensions: 10.5 x 6.5 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4608801AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Magnum Submodels:
- R/T, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Magnum Starter Part Number: 4896464AE
$364.02 MSRP: $552.00
You Save: $187.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4896464AC
- Item Weight: 7.20 Pounds
- Item Dimensions: 10.3 x 7.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896464AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Magnum Submodels:
- R/T, SRT8 | 5.7L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2007 Dodge Magnum Starter Motor Parts and Q&A

Q: How to Install a Starter Motor for a 2.7L Engine on 2007 Dodge Magnum?
A: To install the 2.7L engine starter motor, maneuver the engine starter motor past the transmission and exhaust, insert the plastic retainer into the dust shield and lock it into place. Install the starter bolts, electrical wiring, intermediate shaft alignment and pinch bolt tightening. Finally, reinstall the splash shield and connect the battery again.