How to Install a Door Handle on the Rear Exterior on 2007 Dodge Nitro?

First, screw the handle and front handle nut to the rear door and tighten it with 4.5 Nm (40 in. lbs.) of force. Install the carrier plate to the door after raising the glass up, so you can work on the back handle nut; using a light source and a magnetic socket will stop the nut from getting lost inside the door. Afterward, fasten the nut on the handle to the rack and tighten it to 4.5 Nm (40 in. lbs.). Then, add the door plug (2) and at the end, attach the trim panel to the door.

OEM 2007 Dodge Nitro Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Handle found

View related parts
2007 Dodge Nitro Handle, Outside, Rear Outer Part Number: 4589164AI
$140.38 MSRP: $209.00
You Save: $68.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Exterior Door; Exterior Door Handle, Center Outer, Front Outer, Rear Outer; Handle Exterior Door; Exterior Door Handle
- Position: Rear Outer
- Replaces: 4589164AE, 4589164AD, 4589164AC, 4589164AH, 4589164AF
- Item Weight: 1.20 Pounds
- Item Dimensions: 10.3 x 3.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589164AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Door Handle Parts and Q&A

Q: How to Install a Door Handle on the Rear Exterior on 2007 Dodge Nitro?
A: First, screw the handle and front handle nut to the rear door and tighten it with 4.5 Nm (40 in. lbs.) of force. Install the carrier plate to the door after raising the glass up, so you can work on the back handle nut; using a light source and a magnetic socket will stop the nut from getting lost inside the door. Afterward, fasten the nut on the handle to the rack and tighten it to 4.5 Nm (40 in. lbs.). Then, add the door plug (2) and at the end, attach the trim panel to the door.