JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Nitro Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Intake Manifolds found
2007 Dodge Nitro Intake Manifold Part Number: 53032999AD
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes Items 2, 3, 4, 5, 6, 7; Manifold Intake
- Item Weight: 12.10 Pounds
- Item Dimensions: 18.9 x 17.0 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032999AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro Intake Manifold, Lower Part Number: 4892233AA
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Item Weight: 7.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892233AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro Intake Plenum, Upper Part Number: 68049742AB
Product Specifications- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4593578AB, 68049742AA, 4593578AC
- Item Weight: 24.90 Pounds
- Item Dimensions: 11.2 x 20.6 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68049742AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro Intake Manifold, Upper Part Number: 4593578AD
Product Specifications- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Item Weight: 19.40 Pounds
- Item Dimensions: 25.3 x 24.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593578AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro Intake Manifold Parts and Q&A
- Q: How to Install an Intake Manifold and Its Components on 2007 Dodge Nitro?A: Begin by setting the intake manifold seals first and then installed the intake manifold onto the engine. Facilitate the connection of the intake manifold by holding it with retaining bolts and tighten them according to the required order to 12 Nm (105 in. lbs.). It is important to tighten the throttle body correctly so that the throttle plate does not fail. After that, set the throttle body-to-intake manifold O-ring in place and add the four bolts to secure the throttle body to the manifold, with each bolt tightened to 7 Nm (60 in. lbs.). Attach the cable of the electrical thermostat, put on the fuel rail and mount the EGR tube once the throttle body electrical connector is joined. After that, set in place the ignition coil towers and attach the electrical cords for the MAP Sensor, CTS Sensor and those towers. Hold the top oil dipstick tube in place with its retaining bolt and make sure to attach the Vapor purge hose, Brake booster hose and Positive crankcase ventilation hose. Fill the coolant, connect the resonator assembly and air inlet hose and link the negative battery cable once more. Scan your vehicle and use the Relearn ETC option to recalibrate it.
Related 2007 Dodge Nitro Parts
2007 Dodge Nitro Fuel Pump
2007 Dodge Nitro Air Filter
2007 Dodge Nitro Fuel Tank
2007 Dodge Nitro Air Duct
2007 Dodge Nitro Air Filter Box
2007 Dodge Nitro Air Intake Coupling
2007 Dodge Nitro Fuel Filler Neck
2007 Dodge Nitro Fuel Level Sensor
2007 Dodge Nitro Fuel Sending Unit
2007 Dodge Nitro Fuel Tank Lock Ring
2007 Dodge Nitro Intake Manifold Gasket
2007 Dodge Nitro Throttle Body Gasket