Other Name: Weather Strip - Front Door Body Mounted; Door Seal, Front Inner; Weatherstrip; Body Weatherstrip; Weatherstrip Front Door Body Mounted; Door Seal
Other Name: Weather Strip - Front Door Belt Inner; Door Window Belt Weatherstrip, Front Left; Door Moldings; Weatherstrip Front Door Belt Inner; Weatherstrip
Position: Front Inner Driver Side
Replaces: 55360951AC, 55360951AA, 55360951AB
Item Weight: 1.20 Pounds
Item Dimensions: 25.5 x 2.0 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55360951AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Weather Strip - Front Door Belt Inner; Door Window Belt Weatherstrip, Front Right; Door Moldings; Weatherstrip Front Door Belt Inner; Weatherstrip
Position: Front Inner Passenger Side
Replaces: 55360950AB, 55360950AA, 55360950AC
Item Weight: 0.90 Pounds
Item Dimensions: 25.8 x 2.1 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55360950AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
2007 Dodge Nitro Weather Strip Parts and Q&A
Q: How to Remove the Rear Door Weather Strip on 2007 Dodge Nitro?
A: Before you touch the rear door weather strip, drop the window all the way down. After that, insert the 9093 model outer door belt molding removal tool near the back in the space beside the glass and move the tool a little more than 5 inches (14 cm) forward. While pressing down on the outer belt molding, rotate the upper tool away from the vehicle by 6 - 8 cm (2.5 - 3 in.), then release the molding by moving it upward. Perform this same movement at 28 cm (11 in.), 43 cm (17 in.) and 57 cm (22.5 in.) from the back of the door. Also, take out the outer belt molding.