How to Install an Oil Cooler and Its Components on 2007 Dodge Sprinter 2500?

After laying down the oil cooler housing gasket, slide in the oil cooler housing and screw all the bolts in a cross pattern until you reach 25 Nm (18 ft. lbs.) of torque. Then, insert an oil filter into its housing and place the thermostat gasket, before tightening the thermostat housing with bolts at a torque of 25 Nm (18 ft. lbs.). Put the upper radiator hose over the thermostat housing and afterward, install the accessory drive idler pulley, tensioner and belt one after another. After that, set up the air pump (5) and top up both the oil and coolant.

OEM 2007 Dodge Sprinter 2500 Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Coolers found

View related parts
2007 Dodge Sprinter 2500 Oil Cooler Part Number: 5179360AB
Product Specifications
- Other Name: Cooler - Oil; Engine Oil Cooler; Cooler Oil
- Replaces: 5179360AA
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.0 x 4.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179360AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL
View related parts
2007 Dodge Sprinter 2500 Power Steering Oil Cooler, Front Part Number: 68140155AA
Product Specifications
- Other Name: Cooler - Oil Cooler; Power Steering Cooler, Front; Power Steering Cooler; Cooler Line
- Position: Front
- Replaces: 68006682AA
- Item Weight: 1.60 Pounds
- Item Dimensions: 42.8 x 11.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68140155AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Dodge Sprinter 2500 Power Steering Oil Cooler, Front Part Number: 68140156AA
Product Specifications
- Other Name: Cooler - Power Steering Cooler; Power Steering Cooler, Front; Power Steering Cooler; Cooler Line
- Position: Front
- Replaces: 68006683AA
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68140156AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 2500 Oil Cooler Part Number: 68033097AA
Product Specifications
- Other Name: Filter - Oil; Engine Oil Cooler; Oil Cooler Assembly
- Replaces: 68013921AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 15.6 x 8.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033097AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 2500 Oil Cooler Parts and Q&A

Q: How to Install an Oil Cooler and Its Components on 2007 Dodge Sprinter 2500?
A: After laying down the oil cooler housing gasket, slide in the oil cooler housing and screw all the bolts in a cross pattern until you reach 25 Nm (18 ft. lbs.) of torque. Then, insert an oil filter into its housing and place the thermostat gasket, before tightening the thermostat housing with bolts at a torque of 25 Nm (18 ft. lbs.). Put the upper radiator hose over the thermostat housing and afterward, install the accessory drive idler pulley, tensioner and belt one after another. After that, set up the air pump (5) and top up both the oil and coolant.