How to Safely Install and Align a Wiper Switch on 2007 Jeep Patriot?

Before installing the wiper switch, disconnect and isolate the battery negative cable, disable the supplemental restraint system and make sure to postpone installing until the capacitor has discharged for two minutes, as this is very important in vehicles having air bags. Put the switch board as close as possible to the bracket on the right side of the Clock Spring. After that, join the jumper wire harness connector to the connector receptacle on the inboard side of the switch. Place the slide tabs on the switch housing over the holes in the Clock Spring bracket and push the switch into the bracket until it is done. Secure the back of the multi-function switch by tightening the screw 1 Nm (10 in. lbs.) with a 2.5-millimeter screwdriver. As a final step, put the upper shroud on the steering column, then the lower one on the shrouder adapter and rejoin the negative battery terminal.

OEM 2007 Jeep Patriot Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Switches found

View related parts
2007 Jeep Patriot Wiper Switch Part Number: 68003215AD
$146.07 MSRP: $222.00
You Save: $75.93 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Wiper; Windshield Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch Wiper
- Replaces: 68003215AC, 5183957AA, 68003215AB, 68003215AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003215AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Turn Signal Switch Part Number: 68041485AD
$112.62 MSRP: $172.00
You Save: $59.38 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Signal Switch; Switch Multifunction
- Replaces: 5183947AC, 68041485AA, 68041485AB, 5183947AA, 68041485AC, 5183947AB
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.4 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68041485AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Turn Signal Switch Part Number: 5183952AF
$44.94 MSRP: $66.60
You Save: $21.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5183952AA, 5183952AC, 5183952AB, 5183952AD, 5183952AE
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.9 x 4.5 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183952AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Jeep Patriot Wiper Switch Parts and Q&A

Q: How to Safely Install and Align a Wiper Switch on 2007 Jeep Patriot?
A: Before installing the wiper switch, disconnect and isolate the battery negative cable, disable the supplemental restraint system and make sure to postpone installing until the capacitor has discharged for two minutes, as this is very important in vehicles having air bags. Put the switch board as close as possible to the bracket on the right side of the Clock Spring. After that, join the jumper wire harness connector to the connector receptacle on the inboard side of the switch. Place the slide tabs on the switch housing over the holes in the Clock Spring bracket and push the switch into the bracket until it is done. Secure the back of the multi-function switch by tightening the screw 1 Nm (10 in. lbs.) with a 2.5-millimeter screwdriver. As a final step, put the upper shroud on the steering column, then the lower one on the shrouder adapter and rejoin the negative battery terminal.