Disconnect the negative cable to your car battery, then wait for two minutes for the battery systems to discharge, as SRS must be disconnected before you handle the wiper switch. Start by taking off the shrouds on both the top and the bottom of the steering wheel. After that, take out the screw attaching the right multi-function switch to the mounting bracket on the right side of the
Clock Spring. Slide the switch along the same side of the Clock Spring to detach the slide tabs on the housing from the grooves in the mounting bracket. Break the connection between the jumper wire harness connector and the connector receptacle on the right near multi-function switch, then disconnect the switch from the Clock Spring.