How to Replace a Brake Light Switch on 2008 Chrysler 300?

Installation of the brake light switch, extend the plunger to the maximum extent, install the wiring harness and install the switch by ensuring that it is aligned to the bracket and turned clockwise. Do not press hard on the brake pedal, and then check the brake lamps and the speed control.

OEM 2008 Chrysler 300 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Chrysler 300 Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Chrysler 300 Brake Light Switch Parts and Q&A

Q: How to Replace a Brake Light Switch on 2008 Chrysler 300?
A: Installation of the brake light switch, extend the plunger to the maximum extent, install the wiring harness and install the switch by ensuring that it is aligned to the bracket and turned clockwise. Do not press hard on the brake pedal, and then check the brake lamps and the speed control.