Other Name: Control - A/C And Heater - Auxiliary; HVAC Temperature Control Panel; Climate Control Module; Blower Switch; Heater & A/C Control; Dash Control Unit; Controller; Control A/C And Heater - Auxiliary
Position: Rear
Item Weight: 1.00 Pounds
Item Dimensions: 10.2 x 6.3 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5127844AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Control - A/C And Heater; HVAC Temperature Control Panel, Front; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
Other Name: Control - A/C And Heater; HVAC Temperature Control Panel, Front; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2008 Chrysler Aspen A/C Switch Parts and Q&A
Q: How to Install the A/C Switch for Temperature Control on 2008 Chrysler Aspen?
A: Put the A/C-heater control into the instrument panel center bezel and fasten it with screws at 2 Nm (17 in. lbs.). After that, hook up the wire harness to the A/C-heater control and fit the instrument panel center bezel. Next, link again the end of the negative battery cable to the battery's negative terminal.