How to install Control Arm Bushing on 2008 Chrysler Aspen?

To install the bushing at the front of the arm, make sure you use a lot of extreme pressure lubricant on the threaded areas of the tool. Install new bushing (4) into the control arm (3) using tools C4212-F (Press), 9334-3 (Bushing insertion depth spacer) and 9334-1 (Driver). To install the small bushing (4) on the torsion bar side, put it into the lower control arm (3) and use tools C4212-F (Press), 9334-3 (Bushing installation depth spacer) and 9334-2 (Driver). When the installation is done, pull the control arm out of the vise and put the lower control arm on. After jacking up, reset the vehicle height and do a wheel alignment to finish the job.

OEM 2008 Chrysler Aspen Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arm Bushings found

View related parts
2008 Chrysler Aspen Rear Bushings Part Number: 52113214AA
$60.63 MSRP: $109.00
You Save: $48.37 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushing Control Arm
- Item Weight: 2.20 Pounds
- Item Dimensions: 3.2 x 3.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113214AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Front Bushings Part Number: 52855292AA
$68.10 MSRP: $86.33
You Save: $18.23 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing Kit; Control Arm Bush Kit; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushing Control Arm
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.2 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855292AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Control Arm Bushing Parts and Q&A

Q: How to install Control Arm Bushing on 2008 Chrysler Aspen?
A: To install the bushing at the front of the arm, make sure you use a lot of extreme pressure lubricant on the threaded areas of the tool. Install new bushing (4) into the control arm (3) using tools C4212-F (Press), 9334-3 (Bushing insertion depth spacer) and 9334-1 (Driver). To install the small bushing (4) on the torsion bar side, put it into the lower control arm (3) and use tools C4212-F (Press), 9334-3 (Bushing installation depth spacer) and 9334-2 (Driver). When the installation is done, pull the control arm out of the vise and put the lower control arm on. After jacking up, reset the vehicle height and do a wheel alignment to finish the job.