How to Service a Cruise Control Switch on 2008 Chrysler Aspen?

But before you can service the cruise control switch, remove and isolate the negative battery cable from the battery and wait 2 minutes for the system capacitor to discharge to avoid accidental air bag deployment. Then, remove the air bag module then unplug the electrical connector. At last, you remove the speed control switch mounting screw (1) and take out switch from the steering wheel.

OEM 2008 Chrysler Aspen Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Switches found

View related parts
2008 Chrysler Aspen Cruise Switch, Passenger Side Part Number: 56044928AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch Speed Control
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.7 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044928AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Cruise Switch, Driver Side Part Number: 56044929AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch Speed Control
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044929AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Cruise Control Switch Parts and Q&A

Q: How to Service a Cruise Control Switch on 2008 Chrysler Aspen?
A: But before you can service the cruise control switch, remove and isolate the negative battery cable from the battery and wait 2 minutes for the system capacitor to discharge to avoid accidental air bag deployment. Then, remove the air bag module then unplug the electrical connector. At last, you remove the speed control switch mounting screw (1) and take out switch from the steering wheel.