How to Install the Cruise Control Switch on 2009 Chrysler Aspen?

To install the Speed Control Switch, place and tense the Speed Control Switch to the steering wheel by tightening the mounting screw 15 in. lbs. (1.7 Nm). Then, connect the electrical connector, install the airbag module and reconnect the negative battery cable.

OEM 2009 Chrysler Aspen Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Switches found

View related parts
2009 Chrysler Aspen Cruise Switch, Passenger Side Part Number: 56044928AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch Speed Control
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.7 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044928AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Cruise Switch, Driver Side Part Number: 56044929AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch Speed Control
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044929AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Cruise Control Switch Parts and Q&A

Q: How to Install the Cruise Control Switch on 2009 Chrysler Aspen?
A: To install the Speed Control Switch, place and tense the Speed Control Switch to the steering wheel by tightening the mounting screw 15 in. lbs. (1.7 Nm). Then, connect the electrical connector, install the airbag module and reconnect the negative battery cable.