How to Properly Install a Seat Heater Switch in the Correct Mounting Holes on 2008 Chrysler Aspen?

Install the heated seat switches into their matched holes of switch bezel 2. Each switch has a keyway in its connector, so it should go into its proper hole. Start by nudging the heated seat switch forward through the opening at the back of the bezel. After that, place the center bezel onto the instrument panel. At this point, join the battery's negative wire and then check whether the seat heating works as it should.

OEM 2008 Chrysler Aspen Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Seat Heater Switches found

View related parts
2008 Chrysler Aspen Seat Switch, Center Driver Side Part Number: 56040688AF
$69.80 MSRP: $106.00
You Save: $36.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Center Right, Center Left, Front Right, Front Left, Rear Right, Left.; Seat Heat Switch; Switch
- Position: Center Driver Side
- Replaces: 56040688AE, 56040688AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56040688AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Seat Switch, Rear Driver Side Part Number: 56040639AF
$68.68 MSRP: $95.30
You Save: $26.62 (28%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Heater Switch (Ctr R/L, Frt R/L, Rear L, Rt), Power Switch (Left); Seat Heat Switch; Switch
- Position: Rear Driver Side
- Replaces: 56040639AD, 56040639AE
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56040639AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Seat Switch, Center Passenger Side Part Number: 56045626AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Center Right, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Center Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045626AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Seat Switch, Driver Side Part Number: 56045625AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Center Left, Left; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 2.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045625AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Seat Heater Switch Parts and Q&A

Q: How to Properly Install a Seat Heater Switch in the Correct Mounting Holes on 2008 Chrysler Aspen?
A: Install the heated seat switches into their matched holes of switch bezel 2. Each switch has a keyway in its connector, so it should go into its proper hole. Start by nudging the heated seat switch forward through the opening at the back of the bezel. After that, place the center bezel onto the instrument panel. At this point, join the battery's negative wire and then check whether the seat heating works as it should.