How to Install an Ignition Coil on a 4.7L V-8 Engine on 2008 Chrysler Aspen?

When putting an ignition coil on a 4.7L V-8 engine, first use compressed air to dust off any dirt or pollutants from around the top of the spark plug. Inspect the rubber boot on the coil and grease the end of the rubber boot and the spark plug using Mopar(R) Dielectric Grease # J8126688. Place the ignition coil in the opening of the cylinder head and turn it to fasten it onto the spark plug. The bolt for the coil mount is also used to secure the intake manifold, so make sure to tighten it to 12 Nm (106 in.lbs.) torque and then recheck all mounting bolts when replacing any coils. Snap the electrical connector onto the coil and then fix the secondary cable to the coil. When required, replace or reinstall the throttle body air intake tube or intake air box again.

OEM 2008 Chrysler Aspen Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2008 Chrysler Aspen Ignition Coil Part Number: 5149049AB
$86.41 MSRP: $130.00
You Save: $43.59 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.5 x 3.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149049AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 3.5 x 6.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Ignition Coil Parts and Q&A

Q: How to Install an Ignition Coil on a 4.7L V-8 Engine on 2008 Chrysler Aspen?
A: When putting an ignition coil on a 4.7L V-8 engine, first use compressed air to dust off any dirt or pollutants from around the top of the spark plug. Inspect the rubber boot on the coil and grease the end of the rubber boot and the spark plug using Mopar(R) Dielectric Grease # J8126688. Place the ignition coil in the opening of the cylinder head and turn it to fasten it onto the spark plug. The bolt for the coil mount is also used to secure the intake manifold, so make sure to tighten it to 12 Nm (106 in.lbs.) torque and then recheck all mounting bolts when replacing any coils. Snap the electrical connector onto the coil and then fix the secondary cable to the coil. When required, replace or reinstall the throttle body air intake tube or intake air box again.