Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2008 Chrysler Pacifica Wheelhouse Parts and Q&A
Q: How Does Wheelhouse Assist in Servicing the Rear Fender Liner on 2008 Chrysler Pacifica?
A: Support the vehicle with wheel stands, raise it and remove the rear wheel before you start. Take out the screw that connects the splash shield on the back fender with the cladding and then loosen the four push pin fasteners holding the shield to the inner wheelhouse. In addition, remove both push pin fasteners attaching the rear splash shield to the rear fascia aperture bracket. Move on to next by detaching the splash shield from the vehicle.