How to Install a Liftgate Hinge on 2008 Chrysler Pacifica?

First, cover the hinge mating surfaces with an appropriate body sealer before installing the trunk hinge. If you like, paint the replacement hinge before installing it on the car. Put the hinge into position with the marks on the liftgate and screw on the bolts, using 33 Nm (24 ft. lbs.) torque. After that, fit the hinge into the spots marked on the roof header and secure it to the header by screwing on the nuts to 23 Nm (17 ft. lbs.) torque. Before you finish, measure and fit the liftgate and install the liftgate header trim panel.

OEM 2008 Chrysler Pacifica Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Hinges found

View related parts
2008 Chrysler Pacifica Hinge, Rear Driver Side Part Number: 5054701AB
$6.94 MSRP: $39.85
You Save: $32.91 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Driver Side
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Hinge, Rear Passenger Side Part Number: 5054700AB
$6.94 MSRP: $39.85
You Save: $32.91 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Passenger Side
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054700AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Liftgate Hinge Parts and Q&A

Q: How to Install a Liftgate Hinge on 2008 Chrysler Pacifica?
A: First, cover the hinge mating surfaces with an appropriate body sealer before installing the trunk hinge. If you like, paint the replacement hinge before installing it on the car. Put the hinge into position with the marks on the liftgate and screw on the bolts, using 33 Nm (24 ft. lbs.) torque. After that, fit the hinge into the spots marked on the roof header and secure it to the header by screwing on the nuts to 23 Nm (17 ft. lbs.) torque. Before you finish, measure and fit the liftgate and install the liftgate header trim panel.