Other Name: Handle - Exterior Door; Exterior Door Handle, Front Left Outer, Front Right Outer, Rear Right Outer; Handle Exterior Door; Exterior Door Handle
Position: Front Outer Driver Side
Replaces: 4589186AC, 4589186AA
Item Weight: 1.40 Pounds
Item Dimensions: 12.9 x 5.5 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4589186AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
Other Name: Handle - Exterior Door; Exterior Door Handle, Front Left Outer; Handle Exterior Door; Exterior Door Handle
Position: Front Outer Driver Side
Replaces: XU57FKGAC, XU57FKGAA
Item Weight: 2.10 Pounds
Item Dimensions: 12.6 x 5.7 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: XU57FKGAD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 2 |Next >
1-20 of 40 Results
2008 Chrysler Sebring Door Handle Parts and Q&A
Q: How to Install a Rear Door Handle on 2008 Chrysler Sebring?
A: If the vehicle has a window switch, attach its electrical connector to the door panel before you fit the interior handle. After that, place the inside handle on the trim panel and press it to snap it in place. Lastly, fit the three screws so that one is underneath the handle and the other two are hidden inside the trim panel under the handle.