Other Name: Handle - Exterior Door; Exterior Door Handle, Front Left Outer, Front Right Outer, Rear Right Outer; Handle Exterior Door; Exterior Door Handle
Position: Front Outer Driver Side
Replaces: 4589186AC, 4589186AA
Item Weight: 1.40 Pounds
Item Dimensions: 12.9 x 5.5 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4589186AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
Other Name: Handle - Exterior Door; Exterior Door Handle, Front Left Outer; Handle Exterior Door; Exterior Door Handle
Position: Front Outer Driver Side
Replaces: XU57SW1AA, XU57SW1AC
Item Weight: 1.40 Pounds
Item Dimensions: 12.8 x 5.7 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: XU57SW1AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
2007 Chrysler Sebring Door Handle Parts and Q&A
Q: How to Install a Rear Door Handle on 2007 Chrysler Sebring?
A: Start by sliding the outside door handle into the door shell and then attach the outside handle bolts to the outer door, tightening them to 7 Nm (62 in.lbs.). After that, link the linkage to the outside handle, insert the carrier plate access hole plug and attach the trim panel lastly.