How to Maintain a Washer Reservoir on 2008 Chrysler Sebring?

The first step to work on the windshield washer reservoir is to remove and isolate the battery negative remote cable. After that, remove the washer fluid hose from the connector found on the upper part of the right shock tower. If you have to, take out part of the bumper fascia so you can open the reservoir. Take out the wire connection between the washer pump and the harness, then disconnect the reservoir from the back support near the passenger side. Then remove the bolts holding the reservoir to the body, letting it fall away from the vehicle. Finish by pouring the washer fluid out of the reservoir and into a container that's suitable.

OEM 2008 Chrysler Sebring Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2008 Chrysler Sebring Washer Reservoir Part Number: 68101141AA
$77.75 MSRP: $162.00
You Save: $84.25 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Windshield Washer
- Replaces: 68020520AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 12.5 x 18.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68101141AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Washer Reservoir Parts and Q&A

Q: How to Maintain a Washer Reservoir on 2008 Chrysler Sebring?
A: The first step to work on the windshield washer reservoir is to remove and isolate the battery negative remote cable. After that, remove the washer fluid hose from the connector found on the upper part of the right shock tower. If you have to, take out part of the bumper fascia so you can open the reservoir. Take out the wire connection between the washer pump and the harness, then disconnect the reservoir from the back support near the passenger side. Then remove the bolts holding the reservoir to the body, letting it fall away from the vehicle. Finish by pouring the washer fluid out of the reservoir and into a container that's suitable.