How to Maintain and Fix a Washer Reservoir on 2007 Chrysler Sebring?

Before you work on the windshield washer reservoir, always detach and cut off the negative battery cable. After that, remove the washer fluid hose from the in-line fitting that's near the top of the right shock tower. Remove the bumper trim enough to get to the fuel reservoir. Carefully pull the wire connector off the washer pump and the harness mounting tab. Remove the bolts holding the reservoir, then move the reservoir down and clear of the vehicle. When you have drained all the water out, collect the washer fluid from the reservoir into a proper container.

OEM 2007 Chrysler Sebring Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2007 Chrysler Sebring Washer Reservoir Part Number: 68101141AA
$77.75 MSRP: $162.00
You Save: $84.25 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Windshield Washer
- Replaces: 68020520AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 12.5 x 18.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68101141AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Washer Reservoir Parts and Q&A

Q: How to Maintain and Fix a Washer Reservoir on 2007 Chrysler Sebring?
A: Before you work on the windshield washer reservoir, always detach and cut off the negative battery cable. After that, remove the washer fluid hose from the in-line fitting that's near the top of the right shock tower. Remove the bumper trim enough to get to the fuel reservoir. Carefully pull the wire connector off the washer pump and the harness mounting tab. Remove the bolts holding the reservoir, then move the reservoir down and clear of the vehicle. When you have drained all the water out, collect the washer fluid from the reservoir into a proper container.