How Can a Seat Heater Be Installed to Prevent Premature Failure on 2008 Dodge Avenger?

When installing the replacement heating element, do not fold it in order to avoid failure. Peel the adhesive backing and stick it on the element of the factory. Connect the electrical connectors and battery negative cable and check the heated seat system. Lastly, install the trim cover, taking care to route wires correctly and secure excess wire.

OEM 2008 Dodge Avenger Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2008 Dodge Avenger Seat Cushion Heater Part Number: 4610087AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater; Seat Back Heater; Element; Pad Heater
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.5 x 7.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610087AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Avenger Seat Cushion Heater Part Number: 4610079AA
Product Specifications
- Other Name: Pad - Heater; Seat Back Cushion; Seat Heater; Seat Back Heater; Pad Heater Cushion; Pad Heater
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610079AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2008 Dodge Avenger Seat Heater Parts and Q&A

Q: How Can a Seat Heater Be Installed to Prevent Premature Failure on 2008 Dodge Avenger?
A: When installing the replacement heating element, do not fold it in order to avoid failure. Peel the adhesive backing and stick it on the element of the factory. Connect the electrical connectors and battery negative cable and check the heated seat system. Lastly, install the trim cover, taking care to route wires correctly and secure excess wire.