How to Service and Repair Trunk Lid Lift Support on 2008 Dodge Avenger?

Start the service of the trunk or liftgate shock support by opening the decklid. Use a small flat tool or the same type to release the clips while you pull the ball socket straight off the ball stud. Then, unlock the gas prop-rod locks and take out the support cylinder from the car.

OEM 2008 Dodge Avenger Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Lift Support found

View related parts
2008 Dodge Avenger Lift Cylinder Part Number: 5155055AB
Product Specifications
- Other Name: Propeller/Gas - Deck Lid; Deck Lid Lift Support; Trunk Lid Lift Support; Liftgate Lift Support; Tailgate Lift Support; Support Cylinder; Propeller Deck Lid; Lift Support
- Item Weight: 1.10 Pounds
- Item Dimensions: 20.0 x 6.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5155055AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2008 Dodge Avenger Trunk Lid Lift Support Parts and Q&A

Q: How to Service and Repair Trunk Lid Lift Support on 2008 Dodge Avenger?
A: Start the service of the trunk or liftgate shock support by opening the decklid. Use a small flat tool or the same type to release the clips while you pull the ball socket straight off the ball stud. Then, unlock the gas prop-rod locks and take out the support cylinder from the car.